2019 sponsor and exhibitors

ESC Sponsor & Exhibitor Descriptions

 2019 E-Scrap Conference and Trade Show
SPONSORS AND EXHIBITORS





45 Drives/Lsoft
Sydney, Nova Scotia
45drives.com

Booth # 420



45Drives provides affordable high-performance, high-capacity, enterprise storage solutions and data destruction hardware for all industries and all size data requirements. The Destroyinator can wipe as many disks as you want and is available in 30, 45, and 60 drive models, which allows users to wipe 1-60 disks in a single unit. KillDisk’s powerful and portable software allows you to destroy all data on hard disks, solid state disks, USB disks and memory cards. Active@ KillDisk is a disk sanitation and partition eraser utility, supporting U.S. DoD 5220.22-M and more than 20 international data sanitizing standards. Licensing assumes no extra cost per erase.


Abington Reldan Metals, LLC
Fairless Hills, Pennsylvania
armetals.com 

Booth # 609



Reldan Metals, Co., a division of Abington Reldan Metals, LLC refinery has been operating over 38 years with a combined experience of over 65 years. Our state of the art LEED certified full service refinery is zero-discharge and holds the following certifications: e-steward 2.0:2013, R2:2013, RIOS, ISO-9001:2015 , ISO-14001:2015, OHSAS 18001:2007 and OSHA SHARP as well as CHWMEG reviewed. Abington Reldan Metals has the capability to handle all types of scrap and is dedicated to providing the highest level of service to recover the maximum value from your precious metal scrap.


Advanced Technology Recycling
Pontiac, Illinois
atrecycle.com

Booth # 614



Advanced Technology Recycling (ATR) is a WOSB that operates eight R2 (Responsible Recycling), ISO: 14001, OHSAS: 18001 certified, fully insured and GSA schedule approved facilities. ATR provides customization and transparent ITAD/ITAM solutions to a wide range of vertical markets, and its service portfolio and logistics capabilities are unmatched in the industry. ATR is registered with the U.S. State Department and authorized to provide ITAD/ITAR services to all federal agencies. Working with ATR in a "Value Driven Vendor Partnership" will leverage ATR’s impeccable reputation to ensure clients receive the very highest degree of brand protection and environmental compliance.


Aeris Protective Packaging
St. Laurent, Quebec
aerispackaging.com

Booth # 302

AERIS Protective Packaging Inc. designs and manufactures eco-friendly, inflatable air-chamber packaging that meets the unique demands of today’s reverse logistics world. Created specifically for products such as tablets, laptops, desktops, smartphones and other fragile items, Aeris’ proprietary products offer superior protection while promoting smaller box sizes and happier customers. Inflatable on demand, Aeris products ship and store flat, consuming only a fraction of the warehouse space. Aeris packaging is designed to survive multiple legs of the RL journey and can often be reused. Custom designs are available for most any product category, with no tools or dyes required.


Allegheny Shredders
Delmont, Pennsylvania
alleghenyshredders.com

Booth # 301

Do you need to destroy hard drives? What about circuit boards, solid state drives and digital media? Allegheny Shredders has been the industry leader for over 50 years, garnering a reputation for manufacturing superior destruction equipment, providing complete, innovative solutions, and delivering outstanding customer support. So whatever customers need to destroy, Allegheny can help make their job a whole lot easier and more profitable.



American Pulverizer Company
St. Louis, Missouri
ampulverizer.com

Booth # 321

Founded in 1908, American Pulverizer Company manufactures and sells heavy-duty, reliable reduction equipment throughout the world. American Pulverizer Ring Mills have become increasingly utilized within e-scrap facilities to provide excellent liberation of ferrous and non-ferrous commodities while offering users excellent wear part life. American Pulverizer’s engineering staff offers complete shredding, conveying and sorting solutions. American Pulverizer also manufactures slow-speed, high torque shredders, hammermills, roll crushers, jaw crushers, trommels, granulators, impactors and breakers.


Ameri-Shred Corp
Alpena, Michigan
ameri-shred.com

Booth # 426



Ameri-Shred is a leading manufacturer of equipment and system solutions for the destruction of SSDs, hard drives and other assorted e-scrap. The company is a leader in digital data destruction equipment.


AMP Robotics
Louisville, Colorado
amprobotics.com

Booth # 617

AMP Robotics is transforming the economics of recycling robotics driven by artificial intelligence (AI). The company’s high-performance industrial robotics system, AMP Cortex, precisely automates the identification, sorting and processing of material streams to extract maximum value for businesses that recycle municipal solid waste, e-waste and construction and demolition debris. The AMP Neuron AI platform operates AMP Cortex using advanced computer vision and machine learning to continuously train itself by processing millions of material images within an ever-expanding neural network that experientially adapts to changes in a facility’s material stream.


Basel Action Network/e-Stewards
Seattle, WA
e-stewards.org

Booth # 526

The e-Stewards® Standard and Certification identifies and promotes the most ethical and responsible electronics recyclers and refurbishers around the world. E-Stewards Certified Recyclers agree to operate at the highest level of environmental and social responsibility. They will ensure that all residual private data on electronic waste equipment they receive is destroyed and that they will never export any hazardous electronics to developing countries from developed countries. In addition, the highest levels of worker and community protection must be met. Organizations that are e-Stewards Certified are audited yearly by third-party auditors. Performance is further uniquely verified by unannounced inspections and GPS tracking. The e-Stewards program is supported by a network of e-Stewards Enterprise partners, including major corporations, municipalities, nonprofits, and institutions that commit to making best efforts to use e-Stewards Certified Recyclers. For more information on e-Stewards, visit www.e-stewards.org


Battery Recycling Made Easy, LLC    
Cartersville, Georgia        
batteryrecyclingmadeeasy.com

Booth # 726

The staff at Battery Recycling Made Easy, LLC has over 50 years of battery manufacturing and process application experience, in addition to process engineering and material handling knowledge. BRME’s patented Induction Melt Technology utilizes the metal components recycled from the batteries in its melt operations to manufacture its Remelt Alloy. This recycled product is a highly sought-after commodity in the United States’ stainless steel marketplace. BRME’s battery process knowledge and expertise, combined with our patented battery recycling technology, has established MCT as the low-cost Leader in its marketplace. The company’s turn-key service includes, but is not limited to, freight, collection containers, sorting, processing, and metal recovery via our patented High Temperature Metal Reclamation System.


Belmont Trading Company
Buffalo Grove, Illinois
belmont-trading.com



Belmont Trading Company has been a global leader in secure and sustainable reuse and recycling solutions for 30 years. The firm offers innovative, full-service asset management and value recovery services for all types of electronic materials, including whole units, components and scrap, across the mobility, computing and telecom network industries. Belmont Trading Company's global best-in-class processing and remarketing capabilities ensure maximum recovery values for clients while minimizing environmental impacts and ensuring complete data security and sanitization for all equipment processed in any of the company's global facilities.


BESA Equipment
Souderton, Pennsylvania       
besa.com

Booth # 605

BESA is a leading provider of complete turnkey e-scrap shredding and sorting systems and feature the industry's best quality, fit, finish and competitive pricing. Standard systems range from fully automated for high-volume processors to basic systems for smaller organizations. Dust control, fire control and attention to worker safety are critical design features incorporated into all systems.


BitRaser / Stellar Data Recovery
Metuchen, New Jersey  
bitraser.com

Booth # 621


BitRaser is a certified data erasure software from Stellar Data Recovery that helps meet bulk and high-speed data erasure needs of ITAD firms, refurbishers and enterprises. BitRaser comes in many variants to erase hard drives, PCs, laptops, servers, mobile devices along with mobile diagnostics solution. The software helps erase data permanently beyond data recovery scope at end of life cycle of IT assets. It provides manageability and scalability along with 100 percent tamper proof audit trails to meet regulatory and statutory data security requirements. The fact that the product is an innovation from a global data recovery company trusted over 25 years makes it more credible over competition; considering the research and service capabilities of the company.


Blancco
Alpharetta, Georgia
blancco.com

Booth # 416


Blancco is the industry standard in data erasure and mobile device diagnostics. Blancco data erasure solutions provide thousands of organizations with the tools they need to add an additional layer of security to their endpoint security policies through secure erasure of IT assets. All erasures are verified and certified through a tamper-proof audit trail. Blancco data erasure solutions have been tested, certified, approved and recommended by 18 governing bodies and leading organizations around the world. No other data erasure software can boast this level of compliance with the rigorous requirements set by government agencies, legal authorities and independent testing laboratories.


BrokerBin.com
Rochester, Minnesotta
brokerbin.com

Booth # 303


BrokerBin is an IT, telecom, imaging and POS B2B marketplace. BrokerBin’s members-only organization is exclusively for brokers, resellers, recyclers, service centers, integrators and wholesalers. Whether a customer is a publicly held company or a small computer shop, BrokerBin can increase its client base, profitability and efficiency. The company’s unique sourcing and searching tools were requested by and designed for IT companies. Buy, sell and research new, used and refurbished components in record time with real time inventory, sortable columns, broadcasts and more.


Clean Earth, Inc.
Hatboro, Pennsylvania       
cleanearthinc.com

Booth # 615

Clean Earth is one of the largest specialty waste companies in the United States providing remediation, disposal, recycling, and beneficial reuse solutions for contaminated soil, dredged material, and hazardous and non-hazardous waste. Everyday Clean Earth takes a hands-on, dedicated approach to recycling and beneficially reusing waste that would otherwise go into landfills. The company's vast portfolio of technologies and services touches nearly every industry that generates waste including energy, infrastructure, commercial, industrial, retail, and healthcare markets.


Cleanlites Recycling, Inc
Cincinnati, Ohio
cleanlites.com

Booth # 627


Cleanlites Recycling is a leader in e-waste recycling, serving corporations, governments, medical facilities, OEMs and more. The company's recycling facilities are 100 percent certified and insured, offering recycling solutions for e-waste, universal waste, product recalls, data destruction and many more waste streams. Cleanlites Recycling works to streamline customer waste streams, and it offers sustainability consulting, hazardous waste management and logistic/hauling services. Cleanlites also operates LampMaster Recycling, which supplies pre-paid recycling kits for lamps, batteries, lighting ballast and e-waste.


CM Shredders/Schutte Hammermill
Sarasota, Florida
cmshredders.com

Booth # 711

CM Shredders has been designing and manufacturing the world's most advanced industrial shredders, wire liberators, granulators, crackermills and turnkey systems for crumb rubber production including magnetic, fiber separation, screening and cleaning systems. Schutte Hammermill has developed an extensive line of size reduction equipment that includes hammer mills, lump breakers, crushers and shredders that provide a consistent and exact finished particle size.


CoastTec
Eldersburg, Maryland
coasttec.com

Booth #308



Get the most money for your APC UPS units with CoastTec! CoastTec is the only R2:2013 and RIOS certified refurbisher of APC UPS units and the only company authorized by APC to remanufacture and sell factory recertified units in the U.S. CoastTec provides a downstream reuse channel for e-recyclers and ITAD/ITAM companies as an alternative solution to dismantling and scrapping units with reuse potential, allowing companies to increase revenue. CoastTec pays the highest picked up rate for APC UPS units in the U.S. Additionally, if you are an IT reseller, partner with CoastTec to sell APC factory recertified UPS units!


Colt Refining and Recycling   
Merrimack, New Hampshire
coltrefining.com

Booth # 515


Colt Refining, Inc. operates the largest fully permitted precious metals refining facility on the East Coast. The operation was designed to process all types of precious metal bearing materials and includes state-of-the-art thermal oxidizing systems, induction melting equipment, milling/blending/sampling process equipment and chemical processing lines. The company’s in-house ICP and fire-assay labs allow customers to receive accurate results in a timely manner.  All forms of precious metal bearing e-scrap are processed by Colt, ensuring their customers receive maximum recovery values. Colt Recycling, the e-scrap processing division of Colt Refining, Inc., is the largest processor of scrap electronics on the East Coast, utilizing a custom designed shred/separation/destruction system to deliver domestic processing solutions to the Fortune 500, telecom and OEM markets.


CompuCycle, Inc.
Houston, Texas
compucycle.com

Booth # 521

CompuCycle offers a variety of IT asset management (ITAM) and IT asset disposition (ITAD) services, enabling businesses to maximize the value of their electronic assets with assurance that their confidential information is protected and their sensitive data securely and responsibly destroyed. With the company's new state-of-the art, fully automated, electronics shredding system, clients can expect secure and guaranteed electronics recycling, brand protection, responsible processing and elimination of the middleman.


Copiton International, LLC
Kissimmee, Florida
copitoninternational.com

Booth # 717

Copiton International, LLC provides fair asset evaluations and effective impartial solutions to companies in need of business solutions. Because of our acute understanding of current market conditions and future trends, Copiton is able to integrate its specialized knowledge and technological enterprise to recommend and execute a deliberate plan of action for your business. The firm is certified to R2,  ISO 14001 and OSHAS 18001. With warehouses in the Northeast and Southeast, Copiton has an expanded service area covering 60% of the U.S.

Data Security, Inc.
Lincoln, Nebraska
datasecurityinc.com

Booth # 724

Data Security, Inc., believes in protecting data by destroying it at end of life. The company works closely with customers to educate them on current security regulations and help them implement feasible solutions that mitigate their security risks. Their made-in-America product line contains a wide variety of degaussers, shredders, media crackers, secure erasers and disintegrators. These options destroy data beyond recovery and often make it possible to recover and reuse the valued components of the drive.

DMS Technology
Marietta, Georgia
dmstechnology.net

Booth # 626

DMS Technology is a source for buying back telecom and networking equipment. The company specializes in Avaya, Nortel, Cisco, Plantronics, Spectralink, Aastra, Polycom and other manufacturers. DMS Technology also deals in voice over IP, PBX systems, small business phone systems and data networking hardware. It has decades of comprehensive knowledge and is able to provide the most value for clientele who want to trade in or sell equipment.


DOWA   
New York, New York
dowa.co.jp/index_e.html

Booth # 616



Dowa has over 130 years of experience in mining, smelting and refining, and the company's focus is to realize precious metal closed loop recycling. Advanced metal extraction technology enables Dowa to extract 22 metal elements at its Kosaka smelter and Akita Zinc in Japan. Dowa's effort to maximize metal recovery and environmental best practices is widely recognized, and the company continues to contribute to a recycling-oriented society through its worldwide network and a broad range of recycling capabilities.


Dynamic Lifecycle Innovations
Onalaska, Wisconsin
thinkdynamic.com

Booth # 300



Dynamic Lifecycle Innovations is a full-service electronics and materials lifecycle management corporation specializing in materials recovery, electronics recycling, IT asset disposition, legislative compliance, product refurbishment, remarketing and resale, mobility management, and data security. Dynamic creates customized service packages designed to safeguard customers’ sensitive data and protect the environment from e-waste and other pollutants. Since the company’s inception in 2007, it has become an industry leader by constantly refining services and processes as it gains new insights into materials life cycle management. The company strives to foster authentic, meaningful relationships with clients, provide competitive value and maximum value recovery, ensure their organizations’ assets and data are properly disposed of, and deliver the security they need to know the job is done right. The firm's corporate headquarters is located in Onalaska, Wisconsin, with additional facilities in Nashville, Tennessee.


Eco-goldex Inc.
St-Laurent, Quebec
eco-goldex.com

Booth # 625

Eco-Goldex is a Canadian company that is dedicated to developing and supplying its innovative Eco-Goldex technology and products of precious metals (Au, Ag, Pd...) and base metal (Sn, Cu...) recovery with zero waste emissions in e-scrap materials recycling. Eco-Goldex's mission is to provide its eco-friendly yet simple and high performance product to global clients regardless of the scale of their operations, from hobbyists to processors handling hundreds tons of material daily. Eco-Goldex technology is used in recycling of any electronic appliances (Au, Ag, Pd...), car catalytic converters (Pd, Pt...) and solar panels (Ag).


EDM RECYCLING INC.
Chino, California
edmrecycling.com

Booth # 306


EDM Recycling is an R2-certified electronics recycler based in Chino, California. With a 100,000 square foot processing facility, EDM offers recycling and ITAD services, including de-manufacturing, data destruction, shredding and both scrap and reuse purchasing. In addition to ITAD, EDM offers ITAM services for data centers, corporations, carriers, MSOs, distributors, government institutions and OEMs.


Equipment Brokers Unlimited
Chatsworth, California
equipmentbrokersunlimited.com

Booth # 715

Equipment Brokers Unlimited (EBU) has been the leading  buyer of equipment for 36 years. EBU buys and sells in the U.S. as well as all international markets, paying top dollar for your equipment. With a no-hassle nationwide pickup freight policy, EBU buys and sells copiers, printers, and office technology of all kinds. Swing by the company's booth to learn more about EBU's growth and new markets and opportunities emerging for your equipment.


E-Reuse Services, Inc.
Chicago, Illinois
ereuseservices.com

Booth # 417



E-Reuse Services provides consulting and collaboration services to electronics repair, recycling and refurbishing businesses looking to improve or expand their electronics reuse operations. ERS hosts the annual Electronics Reuse Conference (ERC), which will be held in Austin, Texas from November 11th – 13th in 2019.  In 2018, ERS launched the E-Reuse Network (ERN), a new collaboration forum to better connect device repair businesses, electronics recyclers, PC refurbishers and ITADs with the vendors that supply them with the tools and services they need to run their businesses.


Eldan Inc.   
Sanborn, New York   
eldan-recycling.com

Booth # 405

Eldan Recycling is a leading supplier of modern recycling equipment. The company gives their customers the best possible tools to succeed with their business, and are recognized worldwide for it. Eldan has supplied equipment to some of the largest recycling companies in the world, helping them making recycling a successful and profitable business. Eldan has also assisted companies entering the recycling industry to build a state of the art recycling facility. Throughout 60 years they have installed more than 830 complete systems and 7,100 single machines to customers in 65 countries.


Electronics Bazaar
New York, New York   
electronicsbazaar.com

Booth # 525

With offices and MAR facilities in the U.S., Dubai and India, Electronics Bazaar buys and sells used laptops and desktops. It is also interested in servers.


Enviroleach Technologies Inc.
Burnaby, British Columbia
enviroleach.com

Booth # 703

EnviroLeach Technologies is a technology company engaged in the development and commercialization of environmentally friendly processes for the recovery of precious metals in the e-waste and mining sectors. Using its proprietary non-toxic, water-based and near neutral pH treatment process, EnviroLeach extracts precious metals from mining ores, concentrates, and e-waste using only FDA approved additives at ambient temperatures. Backed by a staff of highly experienced scientists and engineers, EnviroLeach’s technology is poised to become the world standard in eco-friendly extraction of precious metals in both the conventional mining and e-waste sectors.


Environmental Office Solutions, Inc
East Hartford, Connecticut
eosusa.com

Booth # 411

Environmental Office Solutions, Inc. is an R2-certified collector and recycler providing custom closed-loop solutions and end-of-life asset recovery programs. The company specializes in empty toner cartridges, inkjet cartridges, cell phones and other consumer electronics.


Environmental Reclaim   
Columbus, Ohio
environmentalreclaim.com

Booth # 311


Environmental Reclaim (ER) operates two certified electronic recycling facilities. One is in Columbus, Ohio (221,000 square feet) and the other in Carson City, Nev. (120,000 square feet).  Being certified to R2, ISO 9001, ISO 14001 and OHSAS 18001, ER is committed to adhering to the strict standards of environmentally friendly recycling. ER's comprehensive services include recycling and shredding troublesome, dangerous electronic materials such as copiers, inkjet and laser printers, hard drives, battery backups, mice and keyboards, modems, cable boxes and even back-up generators. The company utilizes six Industrial size shredders (four in Ohio and two in Nevada) that can handle up to 50 tons per hour.


Evotus, Inc.
Raleigh, North Carolina
evotusinc.com

Booth # 326

Evotus is a full-service, domestic refinery for high grade e-scrap. Evotus produces refined precious metal by using innovative product solutions applied to product-specific refining methods and combined with high-tech software. The company's business is based on creating value in the marketplace and supplier relationships with a focus on transparency and profit sharing.


E-Waste Recyclers India
New Delhi, India
ewri.in

Booth # 506

EWRI is a women-focused entrepreneurship that has a pan-India presence as the leading recycling company based in New Delhi. The operation offers complete recycling solutions to various industries across India and has over seven years of experience and expertise in e-waste management. EWRI is authorized by the government of India and is certified under ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007, ISO 27001:2013 and R2. EWRI obtains and recycles phones, computers, telecommunications equipment, consumer electronics, monitors, IT equipment and accessories, storage media and other materials.


E.Tech Management USA INC
Columbus, Ohio
e-techmanagement.com

Booth # 718

E-Tech Management (ETM) is a company with a global presence in the electronics processing and recycling industry. ETM has over 16 years of industry experience, active ownership and a corporate philosophy dedicated to the core values of integrity, quality, and customer satisfaction. The company provides their clients with a sustainable electronic recycling solution for their used electronic devices. Their complete transparency gives their customers the peace of mind to know their materials have been processed and recycled exactly as promised. Every day ETM does its part to protect the earth and the liability of their clients through their ethical, safe and secure recycling processes.


Extreme Protocol Solutions
Uxbridge, Massachussets
enterprisedataerasure.com

Booth # 322



Leveraging over 20 years of storage engineering experience in testing and development, EPS hardware and software erasure solutions are unlike any on the market. The company’s solutions provide a level of innovation unrivaled in the industry, with responsive technical support to back it up. Offering a host of appliances for data center, on-site and in-house test, erasure and imaging deployment, EPS stands apart from competitors both in the diversity of the company's solutions and their engineering design.


FAMCe
Morris, Illinois
firstamericametal.com

Booth # 418

FAMCe is one of the top metal and electronics scrap recycling companies in the world. With multiple domestic locations, the company is poised to compete aggressively for business and seeks commercial and industrial clients.  The company is primarily a buyer of a wide variety of working and non-working e-scrap items.


FORREC SRL
Padova, Italy
forrec.eu

Booth # 720

Forrec markets a wide range of industrial shredders and grinders able to meet the various demands from the solid waste recycling and disposal world. With design, production and services centralized in a single facility, Forrec has achieved the important goals of manufacturing high quality products that provide a series of real advantages for customers (professional advice, assistance and maintenance, spare parts warehouse, and custom solutions). Designed to guarantee high production standards and to be used in continuous cycles, Forrec machines and turnkey installations fully meet various needs and completely satisfy every expectation with the maximum reliability.


Fortune WEEE Solutions
Rahway, New Jersey
fortuneweee.com 

Booth # 729

Fortune WEEE Solutions, Inc. is excited to bring liquid crystal screen recycling to the U.S.  The technology was developed in Taiwan and is currently being used by several OEMs in pilots to process and recycle liquid crystal screen products. The process is a more sustainable alternative to traditional treatment methods. As  the industry continues to look for more sustainable and cost effective ways to manage end of life electronics, Fortune WEEE Solutions, Inc. is excited to offer an innovative recycling solution.


Gannon & Scott   
Cranston, Rhode Island
gannon-scott.com

Booth # 511


Gannon & Scott is a service provider of refining, reclamation and physical/intellectual property destruction for precious metal-bearing scrap. Facilities in Arizona and Rhode Island provide geographic advantages for customers worldwide. The company is ITAR registered, CHWMEG reviewed, ISO 9001:2015-registered and zero discharge. Leading-edge refining technologies, stringent environmental standards, superior returns and customer service all help the company advance the industry’s standards.


Glacier Consulting Services
Clarkston, Michigan
glaciercs.com

Booth # 425

Glacier Consulting was founded in 2016 by Scott Jones and has strategically grown into a team of experts that can help make your standards compliance activities easier. The company is able to assist in person and remotely, from documentation packages to full-service consultation engagements. The Glacier team is versed in quality, environmental, health and safety, automotive and aerospace management standards and is strategically located around the United States. Glacier Consulting staff has been involved with oversight of ISO 14001, OHSAS 18001, R2 (Responsible Recycling), e-Stewards, RIOS (Recycling Industry Operating Standard), ISO 50001 and numerous greenhouse gas standards for a large certification body. During this time, Glacier Consulting has also maintained status as a Lead auditor for ISO 9001, ISO 14001, OHSAS 18001, e-Stewards, R2, RIOS and ISO 50001.


Glencore  
Toronto, Ontario
glencore.ca

Booth # 317


Glencore is one of the world’s largest global diversified natural resource companies, with over 70 years of experience in the recycling industry. Glencore’s electronics recycling business encompasses the Horne copper smelter and CCR refinery in Canada, two sampling facilities in the United States and a global network of commercial offices. The company is continuously sourcing new streams of recyclable materials from new and existing customers and industries. Its state-of-the-art technology and expertise ensure that clients get fair and accurate value for their recyclable materials.


Gold Standard Telecom
Madison, Wisconsin
goldstandardtelecom.com

Booth # 304

Gold Standard Telecom is one of the nation’s largest wholesale office phone suppliers and refurbishment companies. The company is known for helping R2/E-Stewards recycling companies achieve maximum value for their office phones and telecom equipment.


Granutech Saturn Systems
Avon, Ohio
granutech.com

Booth # 725

Granutech Saturn Systems is a global leader in engineering and manufacturing shredder and recycling solutions for a majority of the industrial applications that exist today. Granutech's corporate offices and manufacturing compound are located in Grand Prairie, Texas, which is just minutes from the Dallas-Fort Worth airport. In addition to offering, shredder solutions, Granutech also offers service solutions on existing equipment.


Greeneye Partners
Apple Valley, Minnesota
greeneyepartners.com

Booth # 402

   

Greeneye Partners conducts comprehensive EH&S downstream due diligence audits for the electronics recycling and refurbishment industry. Audits meet the requirements of R2, e-Stewards and EPEAT standards. Greeneye also offers cost-effective and integrated QEH&S management system design, implementation and auditing services for e-Stewards, R2, RIOS, NAID, ISO 14001, ISO 45001, ISO 9001 and online auditor training.


Greentec
Cambridge, Ontario
greentec.com

Booth # 719



Greentec helps clients securely dispose of their electronics in a manner that maximizes value and material recovery. The company has the expertise and advanced processing capabilities, including patented shredding and sorting technology, to break down, separate and extract every ounce of valuable material from collected electronic scrap materials. That means a faster valuation and payment for commodities. Greentec’s capabilities and experience combined with its extensive network of commodity purchasers and consumers makes the firm the partner of choice to deliver maximum profits.


Hanwa Co., LTD
Irvine, California
hanwa.co.jp/en/

Booth # 407


Hanwa Co., LTD. is the largest raw materials trading house in Japan, specializing in electronic scrap for precious metals and copper recovery. The company was established in 1947 and has over 75 offices worldwide. Hanwa buys circuit board scrap, precious metals-bearing bullion/sweeps/dust, lead frame scrap, connectors, and any other precious metals-bearing scrap.


Helluva Container, a Balcon Enterprises, Inc. Company
Elk Point, South Dakota
helluva.com

Booth # 529

Helluva Container, a Balcon Enterprises company, is one of the largest providers of FIBC Bulk Bags and new and used Gaylord Boxes throughout the US. The company also buys used Gaylord boxes. Balcon Enterprises is a Midwestern company with Midwestern values. The company has distribution locations across the country, so they can ship what you need for less. Because every penny counts.


HOBI Interantional Inc.
Dallas, Texas
hobi.com

Booth # 522

HOBI International, Inc. is a leading IT and mobile device asset management company offering a full suite of vertically integrated, closed-loop reverse logistics services. HOBI’s IT services group focuses on corporate IT, data and telecommunications infrastructure, providing resale and re-marketing, data erasure and data destruction, recycling, environmental and compliance reporting, de-installation services, and logistics management. HOBI’s mobile device services group focuses on the repair, refurbishment, resale and recycling of cellular assets.  The company's clients and industry partners trust HOBI to maximize the value of their IT and cellular assets while protecting sensitive corporate or client data.  An Rs, RIOS and ISO 14001 certified firm, HOBI leads the electronics recycling industry in best practices for recycling and commodities recovery.


Holmes ITAD System
Houston, Texas
itadspeed.com

Booth # 327



ITAD system processing is about to break the speed limit. After nearly a year of testing at facilities processing up to 250,000 unique units per year, Technocycle is launching a groundbreaking ITAD system that shaves minutes off per-unit processing time while maintaining best-in-class system auditing, data erasure and image deployment. Visit the company's booth to find out how it can help break your operational speed barriers.


Idaho National Laboratory
Idaho Falls, Idaho
inl.gov

Booth # 624

Idaho National Laboratory is operated by Battelle Energy Alliance on behalf of DOE’s Office of Nuclear Energy. INL leads DOE laboratories in advanced nuclear energy research, development, demonstration and deployment. INL is responding to the growing demands of our modern world with innovations in transportation systems, renewable energy integration, advanced manufacturing, biomass feedstock assembly and environmental sustainability. INL also helps the U.S. departments of Defense and Homeland Security by using its unique capabilities to support efforts to secure industrial control systems from cyber and nuclear threats, develop advanced nuclear facility safeguards, and design advanced wireless sensors and protocols.


Institute of Scrap Recycling Industries, Inc.
Washington, D.C.
isri.org

Booth # 406



The Institute of Scrap Recycling Industries, Inc. (ISRI) is the "Voice of the Recycling Industry." ISRI and its 20 chapters represent approximately 1,300 companies operating in nearly 4,000 locations in the U.S. and 34 countries worldwide that process, broker, and consume scrap commodities, including metals, paper, plastics, glass, rubber, electronics, and textiles. With headquarters in Washington, DC, ISRI provides education, advocacy, safety and compliance training, and promotes public awareness of the vital role recycling plays in the U.S. economy, global trade, the environment and sustainable development. Generating more than $116 billion annually in U.S. economic activity, the scrap recycling industry provides more than a half million good jobs in the U.S. alone.

Interco
Madison, Illinois
intercotradingco.com

Booth # 622

Interco has been recycling computers, electronics and batteries since 1996. One of the first R2:2013 certified recyclers, Interco also focuses on non-ferrous metals and specialty alloys with departments specializing in the solar panel and alternative energy verticals. The company handles mixed loads from across market segments – e-scrap, batteries, non-ferrous metals and more can come together in a single shipment. Material is processed in Interco's 400,000-square-foot facility located on the Illinois side of St. Louis, right in the middle of the country.



IRT   
Waite Park, Minnesota   
irtmn.com

Booth # 502

Integrated Recycling Technologies (IRT) is a Minnesota-based, R2-certified company specializing in all aspects of electronics recycling. With over 20 years of experience, IRT has been a leader in the industry, providing knowledge and insight that is unmatched by its competitors.


Jake, Connor & Crew
Kitchener, Ontario
jakeconnorandcrew.com

Booth # 324

Jake, Connor & Crew is the world’s largest and only direct manufacturer of collection bins and consoles for the information destruction industry. In 1995, the company's Executive Console design created the standard for information and document security worldwide. As the industry grows and regulations change, Jake, Connor & Crew continues to be committed to offering innovative container solutions to keep you and your customer compliant. The company's bins and consoles consistently outperform the competition in structural integrity, security and durability. With innovative options such as our e-Waste Collection Containers and 4-wheel Pedigree Bin Series, Jake, Connor & Crew manufacture purpose designed containers to meet all collection demands. Call the company today to discuss how it can design and rigorously engineer its products to exceed the quality and security requirements of the industry.


J K A Logistics
The Woodlands, Texas
jkalogistics.com

Booth # 422


J K A Logistics specializes in what is often referred to as “white glove service” by its customers, who are primarily recyclers and remarketers of electronic equipment. The company handles pickups across the United States, Canada, South America and the Caribbean. It goes into offices and buildings wherever the equipment is located and picks it up loose, then packs and ships it as requested. Whether it is an individual shipment or a national and/or international project, the ability to track the status of each order is available online. To learn more about the services the company offers, come by and visit the J K A Logistics booth.


JT Environmental Consulting
Orlando, Florida
jtenv.com

Booth # 314


Offering consulting catered to fit clients' every need, JT Environmental Consulting has been assisting organizations focused on data destruction, data sanitization, environmental, health and safety, e-scrap and reuse industries for over 15 years in obtaining and maintaining compliance to their certifications. JT Environmental was the first authorized consulting firm to assist clients to become NAID AAA certified through NAID. The company performs internal, compliance or downstream audits as well as ergonomic evaluations and provide OSHA and EPA mitigation. It can also assist firms in gaining the following certifications: e-Stewards, Green Globes, ISO 9001, ISO 14001, ISO 27001, ISO 50001, LEED, ISO 45001, PRISM, RIOS, R2, TRUE-Zero Waste and many others.


KingBox Group Inc
Vista, California
kingbox.tw

Booth #606


KingBox is a well recognized memory brand for over 20 years, and KingBox Group is the only designated  subsidiary company in North America.The company mainly focus on testing, refurbishing, data wiping and recycling services for electronics such as cell phones, SSD, laptops and tablets. KingBox purchases all kinds of IC chips and provide re-balling and testing services on them. The company also produces RAM and SSDs with new and re-manufactured ICs and buy all kinds of mixed electronic scrap. Certifications: ISO 9001/ISO 14001/OHSAS 18001.


Labelmaster
Chicago, Illinois
labelmaster.com

Booth #613



For more than five decades, Labelmaster has been the go-to source for companies – big and small – to navigate and comply with the complex, ever-changing regulations that govern dangerous goods and hazardous materials. Many recycling companies and carriers are seeking more effective packaging solutions to store and transport lithium batteries and devices that contain them. The Obexion brand of lithium battery packaging – exclusively from Labelmaster –  uses passive technology to achieve capabilities ranging from fire resistance to thermal, flame, gas and ballistic management that will drastically reduce the potential for thermal runaways.


LHD ELECTRONICS(HK) Co.,LTD  
Kowloon, Hong Kong
lianhedali.com

Booth # 723

LHD Electronics is an international trading business based in Hong Kong. The company, which owns and operates a Malaysian factory to handle recycled products, receives most of its supply from the U.S. and is currently considering entering the European market. LHD Electronics specializes in recycling memory, CPU, mobile phone motherboards, tablets, modems, set-top boxes, mobile WiFi, computer motherboards, notebook motherboards, IC chipsets, game consoles, communication motherboards, storage motherboards, DDR, solid hard drives, E-books, computer graphics card, electric toothbrushes, bad LCDs, scanners, credit card machines, computer, servers and more.


Makor Solutions
Minneapolis, Minnesota
makorerp.com

Booth # 323

The MAKOR ERP provides ITAD, reseller and e-waste companies around the globe with a centralized inventory and sales management system to connect all key business units to operate and grow their business by helping their staff achieve more. This is done with state-of-the-art tools to automate the complex process of asset recovery and e-waste recycling, cradle to grave – from prospecting to pick-up, through processing, into inventory and resale. Linking the inventory to multiple e-commerce channels enhances the sales cycle of inventory. The customizable Makor ERP platform is fully scalable, and able to support small, medium and large enterprises in both single and multiple locations.


Mentor Electronics Marketing
Willoughby, Ohio
mentorelectronics.com

Booth # 610



Mentor Electronics Marketing purchases memory (RAM) and processors (CPUs) for reuse. The company also provides value added services to inventory, test, repair and market these components to its global customer base. Mentor can extract value from working or non-working components to deliver the highest value to its clients. Its experienced staff, unique processes, global market knowledge, and market expertise have made the company successful since 1982.


Mitsubishi Materials Corporation
Tokyo, Japan
mmc.co.jp/corporate/en/



Mitsubishi Materials Corporation is a Japanese copper smelter and refinery that has the world's top ranked capacity for receiving and processing e-scrap. Under Mitsubishi Materials Group's corporate philosophy of "For People, Society and the Earth," the company aims to become "the leading business group committed to creating a sustainable world through materials innovation, with use of our unique and distinctive technologies," as part of long-term management policies focused on the early 2020s. Mitsubishi Materials Corporation will continue to contribute to the development of a sustainable society through the collection and recycling of e-scrap in accordance with these policies..


MRP Co., Inc.
Hunt Valley, Maryland
rpcompany.com

Booth # 600


Metal Recycling & Processing Co., Inc. (MRP Company) provides collection, consolidation, processing, brokering and shipping of precious metal scrap, non-ferrous scrap, and tested working electronics. Established in 1987, MRP Company is a full service international metal trading company with an excellent reputation and strong financials. The firm is R2:2013 and ISO 14001 certified and is a charter member of ISRI’s Circle of Safety Excellence. MRP Company is proud of its broad customer base that continues to work with the firm year after year.


MediaClone, Inc.
Reseda, California
media-clone.net

Booth # 427

MediaClone designs and manufacturers drive erasure solutions. The SuperWiper line of products are extremely fast data erasure units that enable the user to erase many drives (hard disk drives, flash media, SSD) simultaneously in an independent erase session. The solutions are standalone hardware units and have no license scheme built in. They are one of the best erasure applications, supporting a number of protocols, including DoD, DoD lite and more. The application generates logfiles and NIST 800-88 certificates and also erases databases that are easy to use. The application is designed to work with a touchscreen and it is easy to use. The units are built to last and used 24/7.


MSS, Inc.
Nashville, Tennessee
mssoptical.com

Booth # 403

MSS designs and manufactures sensor-based sorting equipment for the e-scrap recycling industry. The company’s MetalMiner induction sorter provides the highest metal recovery for ferrous, non-ferrous and stainless steel out of mechanically pre-processed small particle streams. The L-VIS high resolution camera system separates PCB, copper, brass and wires. The CIRRUS eMax sorts engineering plastics into the different resins such as ABS, HIPS, PC and PMMA.


NAR Electronics
Miami, Florida
narelectronics.com

Booth # 505



NAR Electronics is one of the largest electronic recycling companies in Florida with branches in Houston, Philadelphia, Lakeland, Europe and South America. NAR Electronics is also a leader in the secure, sustainable and responsible recycling of computer circuit boards and other end-of-life electronics. The company understands that keeping up with the newest technology and maintaining a healthy fresh cycle is challenging for organizations of all types and sizes. As clients refresh their assets, they rely upon NAR Electronics to optimize the value of their assets. Working with a team of integrated partners provides cradle to grave solutions that optimize each stage of the lifecycle. From procurement to final disposition, NAR Electronics works with you to design the best IT asset lifestyle and decommissioning strategy based upon your company’s goals. NAR Electronics conforms to all R2 Practices, making the company your best choice for disposal of IT assets. You can be sure that your IT equipment is managed according to the highest industry standards while meeting your organizational goals and needs.


NewTech Recycling Inc
Somerset, New Jersey
newtechrecycling.com

Booth # 329

NewTech Recycling is based in Somerset, New Jersey. The company offers computer and electronics recycling, dismantling and data destruction services to private, commercial and government clients.


National Standards Authority of Ireland (NSAI)
Nashua, New Hampshire
nsaiinc.com

Booth # 727



NSAI offers a wide variety of accredited certification services specializing in integrated management system assessments. NSAI's services include R2 (Responsible Recycling), ISO 14001, ISO 45001(OHSAS 18001) , ISO 9001, ISO 50001 , ISO 27001, AS 9100 & TL 9000. The dedicated team at NSAI focuses on their customers and prides itself on delivering a high level of customer service with dedicated representatives and timely communications. If you're seeking a new registration or considering transferring your existing registration, contact the group today.


NSF INTERNATIONAL    
Ann Arbor, Michigan    
nsf.org

Booth #604

NSF International is your partner for eWaste certifications. NSF is fully accredited by the ANSI-ASQ National Accreditation Board (ANAB) to handle your certification requirements for R2, RIOS™ and e-Stewards. The company’s years of eWaste industry experience and their approach ensures that audits focus on performance, not just strict conformance. NSF International implements stringent auditor training and ongoing evaluations to ensure audit consistency. Gain the advantage with NSF auditors who are experts in your industry and can anticipate issues that may impact your audit experience. Customers can count on receiving the highest level of service from their certification body when they partner with NSF International.


Orion Registrar, Inc.
Arvada, Colorado
orion4value.com

Booth # 602

Orion Registrar, Inc. is dedicated to partnering with clients to provide thorough and fair auditing, cost-effective pricing, and excellent customer service. Orion offers certification for Responsible Recycling (R2), RIOS, e-Stewards, ISO 14001, OHSAS 18001, ISO 45001, ISO 9001, AS 9100, 9110, 9120, ISO 13485, SN 9001, TL 9000, SFI CoC, BIFMAe3, and VCAP. With Orion, a company can customize its certification needs, including integrated standards and site-sampling. Orion provides refreshing price transparency with no extra or hidden fees and transfers are welcome and affordable! Experienced auditors nationwide. Come by their booth for a free quote or visit their website.


OUSEI KANKYOSHOJI Co., LTD   
Osaka, Japan   
ousei.co.jp

Booth #307


Ousei Kankyoshoji Co., LTD. is an accredited refinery agent that sources precious metal-bearing materials in Japan. The materials are delivered to smelters for state-of-the-art refinery solutions. The company accepts various kinds of materials that contain precious metals, such as shredded or un-shredded e-scrap, catalytic converter and copper granule, and gold plate liquid from all over the world. Ousei Kankyoshoji offers recovery solutions, reasonable treatment charges, exceptional customer service and prepaid settlement service to help customers maximize metal returns. The firm also follows a mission of environmental improvements.


Owl Electronic Recycling Inc
East Greenville, Pennsylvania
owlelectronicrecycling.com

Booth #612

Owl Electronic Recycling is a full-service industrial plastic, metal and e-scrap recycling exporting company. It provides economical and flexible solutions for industrial recycling problems and provides lower cost alternatives to process recycled materials. Owl Electronic Recycling is one of the fastest growing companies in the Northeastern region and is currently expanding  into different areas of the United States.


PCLiquidations.com
Jacksonville, Florida
pcliquidations.com

Booth # 701



PC Liquidations buys, sells, refurbishes and recycles telecom and IT hardware. The firm concentrates on reuse and deals with a wide variety of IT hardware and business equipment including point-of-sale (POS) systems, LCD monitors, i-Series PCs and business phone systems. The company's ability to re-market through efficient sales processes allows it to pay more to businesses and fellow recyclers for viable equipment. Clients can secure more winning bids by using PC Liquidations to handle phones, printers, computers, scanners, and LCD monitors.


Perry Johnson Registrars, Inc.
Troy, Michigan
pjr.com

Booth # 419



Perry Johnson Registrars, Inc. is an accredited full-service registrar for R2, Rios, 14001,18001 and e-Stewards certifications worldwide.


PlanITROI
Denville, New Jersey
planitroi.com

Booth # 708

PlanITROI, Inc. is a certified “Great Place To Work” company that has a passion to change lives with affordable technology. The company is driven to change the world by disrupting how enterprises, institutions, OEMs, retailers, resellers and leasing companies make decisions on the best place for their retired or returned assets to go next. PlanITROI’s proven and guaranteed process of resale of our clients’ products direct to the next user (with phenomenal customer service and, typically, longer warranties than brand new assets) guarantees the most secure and highest recovery for all types of computing, mobile, infrastructure and consumer electronics. The company is a key supplier of recertified assets to Best Buy, Walmart, Amazon, Staples, Office Depot, CDW, NewEgg, eBay, Groupon and many others.


PowerSource Online   
Longueuil, Quebec
powersourceonline.com

Booth #628


Established in 1997, PowerSource Online has become one of today’s leading global B2B marketplace for dealers, resellers and service companies that deal in IT, telecom, networking, printing and medical parts and equipment with a focus on secondary market of surplus inventory. PowerSource Online helps create strategic partnerships with thousands of members worldwide that successfully source quality parts and sell excess inventory. PowerSource Online is committed to lowering the risks of international trade. All members of the marketplace are individually vetted in order to help control the quality of the membership base and the equipment being traded through the site. The service offers professional buyers the opportunity to connect with professional vendors and over 4 million lines of inventory advertised internationally. 


Precision Grinding & Sharpening
Warsaw, Indiana
precisiongrinding.us

Booth # 513

Precision Grinding & Sharpening is the largest manufacturer and rebuilder of OEM shredder knives in North America. The company utilizes its patent-pending process and PG-1 hard face, where appropriate, for all shredder makes and models. Precision specializes in the rebuilding, sharpening and sales of industrial shredder knives for e-waste, tire recycling and other related industries.


QML, Inc.  
East Providence, Rhode Island   
qml.us   

Booth # 500


QML, Inc. is a premier source for precious metal reclamation. QML's team of qualified professionals has the experience necessary to serve the total metal needs of clients. The company's global services save customers time, reduce risk and provide transparent reporting throughout the chain of custody.


R2- A Program of SERI
Hastings, Minnesota
sustainableElectronics.org

Booth #607

R2 Certification is the most globally respected standard for responsible reuse and recycling of used electronics. Almost 900 facilities in 34 countries are certified to the best practices required by the R2 Standard for data security, environmental protection, resource preservation, and the health and safety of workers and communities. Facilities that repair or recycle electronics can achieve R2 Certification by passing rigorous and independent annual audits that emphasize quality, safety, transparency, and conformance to R2 requirements.  SERI (Sustainable Electronics Recycling International) is the non-profit organization with development and oversight responsibility for R2.


Razor ERP LLC
Wilmington, Delaware
razorerp.com

Booth # 423

RazorERP is the gold standard in recycling and ITAD inventory management solutions. Razor is a cloud-based application designed to scale your recycling and resale operations by consolidating these business units into one streamlined application. Razor organizes the order process, optimizes  inventory management, automates digital marketing and optimizes sales across eBay, Amazon and e-commerce channels.


Renugo
Plainfield, Indiana
app.renugo.com

Booth # 702



Modernizing the IT buying-and-selling wholesale world, RENUGO connects global buyers and provides access to RENUGO's used, refurbished, closeout and obsolescent inventory on a global scale.


Rescue Cell Phone
Dallas, Texas
rescuecellphone.com  

Booth # 524

Rescue Cell Phone (RCP) is an electronics reseller specializing in reuse, and where required, recycling, of small, handheld electronic equipment and components, including data destruction. RCP provides all customers full assurance of proper electronic disposal and specializes in information destruction and the resale of any electronic equipment.


Resource Recycling, Inc.   
Portland, Oregon
resource-recycling.com   

Booth # 721


For over three decades, Resource Recycling, Inc. has been the leader in providing news, analysis and connections to the recycling industry. The company publishes Resource Recycling, Plastics Recycling Update and E-Scrap News, all of which take form as print publications and weekly e-newsletters that deliver the best reporting and industry insight to materials recovery leaders. In addition, Resource Recycling, Inc. produces the Resource Recycling Conference, the Plastics Recycling Conference and the E-Scrap Conference. These marquee events bring together thousands of stakeholder representatives annually for critical conversations and business networking opportunities that open fresh pathways to recycling's growth and evolution.


Reverse Logistics Association (RLA) 
Alpharetta, Georgia
RLA.org


The Reverse Logistics Association is a member-driven, global trade association for the returns and reverse industry, offering information, research, solutions and services for manufacturers, brands and retail companies from third party providers.  Our goals are to educate and inform reverse logistics professionals around the world and be the voice of the reverse logistics industry.


RIOS
Washington, D.C.
rioscertification.org

Booth # 704

The Recycling Industry Operating Standard (RIOS) is the recycling industry’s management system standard for quality, environment, health and safety. Specifically designed for the recycling industry, RIOS integrates the key operational elements of a robust management system, bringing quality, environmental and health and safety together into one streamlined system.


Royal Sustainable Solutions
Greenwood, Misourri
royalsustainablesolutions.com

Booth #705

Royal Sustainable Solutions is a full-service consulting agency for all your environmental health and safety standards.


SGM Magnetics
Bradenton, Florida
sgmmagnetics.com

Booth # 712

Specializing in magnetic and sensor sorter technology in ferrous and non-ferrous metal separation, turnkey solutions within the recycling industry for auto shredders, glass, wood and municipal waste recycling. SGM manufactures eddy current separators, drum magnets, magnetic pulleys, overbelt magnets, sandjets, sensor sorter, color and X-ray separators. SGM’s service department offers technical assistance, repairs on and off-site, design-build services, preventative maintenance and spare parts.


Schupan Asset Management
Kalamzaoo, Michigan
schupanelectronics.com

Booth # 400



Schupan Asset Management is an R2/RIOS Certified global leader in risk mitigation, product destruction, and asset management as well as a large consumer of circuit board scrap. Headquartered in Kalamazoo, Michigan with a 51-year presence in the recycling industry, Schupan Asset Management is more secure, more sustainable, more efficient, and vertically integrated like no other company in our industry. Visit our booth or give us a call to find out why more and more Fortune 100 companies as well as recyclers and corporations across the globe are switching to Schupan Asset Management as their certified service provider and scrap consumer.


SDS Logistics
Nationwide!
sdslogistics.com

Booth # 401



SDS Logistics Services provides a nationwide pack and ship solution (ITAD Logistics) designed to meet the needs of electronic recyclers and asset managers. Additional services include full truckload shipments, less-than-truckload and container drayage to and from all U.S. ports. Email dispatch@sdslogistics.com for more information.


Sesotec, Inc.
Bartlett, Illinois
sesotec.us

Booth # 601

Sesotec is one of the world's leading manufacturers and developers of inspection, separation and sorting systems. Sesotec systems are used in process, packaging and production lines throughout industry and in the specialized preparation of materials for recycling. Sesotec has developed a range of products unequalled in versatility and quality, and each project is given individual attention to ensure the best practicable solution. Precision, intelligence and customer focus: these three guiding principles govern the quality of the services the company provides.


Shred-Tech
Cambridge, Ontario
shred-tech.com

Booth # 316

Shred-Tech custom designs and manufactures mobile and stationary shredding machinery for a variety of waste reduction and recycling applications. Everything from e-waste, metals, tires, documents, medical waste, plastics, wood and packaged products can be destroyed, size reduced and separated. In-house engineering and design services enable the company to customize all standard shredders to meet the specific requirements of customers’ needs. With over 6,000 systems installed worldwide, Shred-Tech is recognized globally for their first-class products and commitment to engineering innovation and quality.


Sigma Recycling Inc
Norcross, Georgia
srinc.us.com 

Booth # 603

Sigma Recycling Inc is a recycling company that buys mostly plastic scrap, paper, rubber, resin, tires and many other materials from all over the country. The company has 8 inspectors to take care of quality. In addition, Sigma has its own internal team to take care of logistics.


Sims Recycling Solutions   
West Chicago, Illinois
simsrecycling.com

Booth # 404

Sims Recycling Solutions (SRS) serves local, national and global clients across a range of industries, helping them to securely and responsibly recycle and manage the disposition of IT equipment and electronic products. The IT asset disposition (ITAD) and electronics recycling services offered at SRS ensure clients of data security, brand protection and maximum IT value recovery, while optimizing material reuse and supporting the circular economy. SRS’ network of wholly owned facilities, paired with select subcontractors, creates a systematic approach with the global reach, expertise and infrastructure necessary to provide a comprehensive solution for e-waste disposition, essentially anywhere in the world. As a part of Sims Metal Management Limited, the world’s leading publicly listed metals and electronics recycler, the company has the goal to be “the world’s best, safest and most responsible recycling company."


Sipi Metals Corp.- Precious Metals
Chicago, Illinois
sipimetals.com

Booth # 428

As North America’s most trusted precious metal processor and refiner, e-scrap and OEM customers worldwide trust Sipi Metals Corp to provide more – more value, more quality, more service. Sipi Metals Corp. - Precious Metal Division recovers the most accurate precious metal value from our client’s essential materials. Sipi is dedicated to delivering high-quality results, professional account management, and exceptional customer service to all customers. The company prides itself on its ISO-certified laboratory and plant operations, its environmentally responsible processes, and in providing data security and secure destruction, while maintaining full regulatory compliance.


SoftThinksUSA    
Austin, Texas
softthinks.com

Booth # 620

SoftThinks is the world leader in the deployment, recovery and repair of Windows and Mac operating systems. Since 2000, major OEMs have used the company’s products. In addition, many refurbishers, including several MARs and retailers, have been using their solutions.The SoftThinks Deployment Suite (SDS) automates the entire refurbishing process for Windows, MAC, and Linux computers and maximizes technicians' efficiency and allows for complete utilization of a warehouse space. SDS can be customized to fit customers' needs to provide hardware audit with integration to any SQL database or ERP, hard drive wipe with a choice of 18 different algorithms, and more. They also have a solution for processing iOS and Android devices.


SSI Shredding Systems, Inc.
Wilsonville, Oregon
ssiworld.com

Booth # 507

With successful installations in over 60 countries spanning all continents, SSI Shredding Systems, Inc. designs and manufactures powerful, proven solutions for a variety of electronic scrap applications. Using patented features and low-speed, high-torque technologies, SSI produces quality one-, two- and four-shaft shredders, primary reducers and material handling systems that complement SSI’s individual equipment or plant based systems.


TechBuyer
West Deptford, New Jersey
techbuyer.com/us

Booth # 518



Techbuyer helps businesses maximize their IT budgets by supplying cost-effective new and quality refurbished servers, storage, memory and networking equipment from over 150 brands including HPE, Dell, IBM and Cisco. Not only do TechBuyer sell a large range of enterprise IT hardware, it also buys used parts and turn them into high quality refurbished IT equipment.
Founded in 2005, Techbuyer has grown from a company run by just two people to a global organization with multiple warehouse facilities located worldwide. TechBuyer has decades of experience in buying used enterprise IT equipment and selling new and certified refurbished IT parts and has worked with thousands of organizations worldwide.


TOMRA Sorting Recycling  
West Sacramento, California
tomra.com/recycling

Booth # 516

TOMRA Sorting Recycling is established in more than 80 global markets and offers a broad range of sorting applications to separate a large variety of valuable fractions including plastics, metals and paper from waste, to name a few. The company's sorting systems recover clean material fractions, delivering significantly higher yields and increased value from the input material. TOMRA can develop and implement bespoke recycling solutions for your business. TOMRA Sorting Solutions is a leading provider of sensor-based sorting systems. With more than 13,000 systems in place across the recycling, food processing and mining industries, they have engineered groundbreaking detection systems, sensor technology and computing solutions.


Toner Toner Toner Co
Willoughby, Ohio
tonertonertoner.com

Booth # 714

Toner Toner Toner is a buy-back company for unused and unwanted imaging supplies. They are based in Willoughby, Ohio and buy toners, drums, maintenance and fuser kits, as well as other printing supplies. The company prides itself on high quality customer service and long-lasting relationships with its customers. Toner Toner Toner wants to help you get rid of those old, overstocked imaging supplies and increase your revenue and profits. The company specializes in purchasing surplus, overstock, clearance, closeout and liquidation inventory of genuine OEM printer supplies. The company purchases ink and toner cartridges for copiers, printers, fax machines and multi-function business machines.


Totall Metal Recycling
Granite City, Illinois
tmrusa.com

Booth # 523



Totall Metal Recycling, Inc. offers recycling, dismantling, destruction, and asset management services to the industry. The company processes and places metals into consuming markets, assisting our smelters and refiners in converting scrap into new, finished products. Totall Metal Recycling specializes in copper, lead, tin, zinc, aluminum, nickel, cobalt, titanium, and electronic waste for gold, silver, platinum, and palladium precious metal recovery. The company engineers, maintains, and operates mechanical equipment to upgrade scrap recoveries and value. We offer long-term pricing commitments, custom services, and logistical support.


Town Business Center
Hanover, Pennsylvania
tbccopiers.com

Booth # 706

Town Business Center buys and sells used copiers, wide formats, digital presses, printers, engineering machines and more.



Toyoshima Green Tech Inc.
McKinney, Texas
toyoshima.co.jp/english/

Booth # 421

Toyoshima Green Tech buys electronic surplus components and printed circuit boards.


Tradeloop Corporation
Arlington, Massachusetts
tradeloop.com

Booth # 328

For over twenty years, Tradeloop has been the wholesale network of choice for ITAD firms, recyclers, refurbishers, brokers, and other professional traders. Tradeloop members easily buy and sell bulk quantities of used, off-lease, and refurbished systems, as well as hard-to-find computer parts and components.


Trinity Metals, LLC
Indianapolis, Indiana
trinitymetals.net

Booth # 503

Trinity Metals is an international wholesaler, processor and trading company specializing in purchasing and processing of electronic scrap and non-ferrous metals.


Umicore 
Hoboken, Belgium
umicore.com

Booth # 700



Umicore Precious Metals Refining operates the world's most sophisticated precious metals recycling facility. The company recovers 17 precious and non-ferrous metals from used electronic scrap, automotive and industrial catalysts, industrial residues and fuel cells.


Universal Recycling Technologies   
Janesville, Wisconsin
urtsolutions.com

Booth # 312


URT is a full service I.T. asset disposition and I.T. equipment recycler. URT’s experience providing secure collection, transportation, data destruction, and proper recycling will assist you with all of your processing and recycling needs. The company’s experience in helping customers maintain absolute data integrity can assure destruction of all sensitive data and provide transparent value resulting in reduced risk and an improved bottom line. URT’s strength in the market ensures you exceed your compliance and revenue goals.   

UNTHA Shredding Technology
Hampton, New Hampshire
untha-america.com

Booth # 501


For nearly 40 years, UNTHA has been building some of the world’s best electronic scrap recycling shredders. The brand of choice for the world’s major circuit board smelters, UNTHA shredders are known for their long life and reliability. Whether you need to simply shred circuit boards for smelting, or to automate your e-scrap recycling, UNTHA shredders lead the way. Ranging from 35 to nearly 500 hp, UNTHA has a shredder to suit your needs.


VarData LLC
Rochester, New York
vardata.com

Booth # 527

VarData is a rapidly-growing value-added reseller that buys and sells a wide range of equipment including networking, server/storage and legacy hardware. With Cisco (CCENT, SMB Product and Positioning) and Juniper (JNCIA-Junos, JNCDA) certifications, and a more than 1000 square foot, ISO 9001 certified test lab, VarData engineers are able to fully test, refurbish, and repair equipment on site.


The Vested Group
Plano, Texas
thevested.com

Booth #520


The Vested Group is a Netsuite solution provider specializing in consulting, development, implementation and support of ERP systems.


Weee Metallica / MCC Non Ferrous Trading Inc  
White Plains, New York
weeemetallica.com/home

Booth # 310


Weee Metallica, commissioned in 2011, is a market leader in the recycling of e-waste with a specialization in the treatment of printed circuit boards.  Using the company's patented PCB pyrolysis process, Weee Metallica extracts valuable metals from PCBs and delivers metal concentrates to smelters around the world. The site is located in the heart of Europe, with a capacity to process 30,000 tons of PCBs. Weee Metallica is a global player, purchasing PCBs from all corners of the world. Their competitive pricing and state-of-the-art sampling provides customers with maximum accountability and transparency.


WipeOS
Eden Prairie, Minnesota
wipeos.com

Booth # 716

WipeOS provides services for clients worldwide and is a solution for permanently destroying data from commonly used IT devices. Using a variety of options, this solution makes wiping, testing and reporting easier than ever. The company now offers equipment diagnostics and free integration with your inventory or ERP system.